Custom Cabinet Doors, Made to Fit

• Tape measure
• Pencil
• Notepad (or notes app)

• Write measurements as Width x Height (example: 14" W x 30" H).
• Make sure there is at least 1/8" clearance around openings.
• Keep notes organized (label each opening by location: “Sink Base Left Door,” “Upper Right of Range,” etc.).

If you order by opening size alone, your doors will be too small.

1. Add 1" to the height.
2. Add 1" to the width, divide by 2, then subtract 1/16".

This creates about a 1/8" gap between the doors. Rule of thumb: if an opening is over 24" wide, order two doors.

• Measure each side’s front edge to the farthest back points for the Width.
• Measure from top to bottom for the Height.
• Add your desired overlay and subtract the door thickness to calculate the required door width.

Lazy Susans are ordered as two distinct doors, with one door needing an extended stile for installation.

Note: Please specify Lazy Susan doors in the customer comment box during checkout (step 4). The easiest way is to list the exact door sizes, for example:

Lazy Susan doors are available for wood doors and RTF. Lazy Susans are only available for Cope N’ Stick doors (not mitered).

• Write out calculations clearly and double-check them.
• Underline or box your final door sizes so they’re easy to spot.
• Proofread sizes and quantities in the order form before submitting.